find more information on
www.tristarbot.com
8
Make the nozzle diameter 0.4mm
The setting here is for PLA filament, if you print with other filament, you need
to set it up accordingly.
Layer height
The layer height mean how height the Z axis move for each layer, if this
number is small, the wall of the print will be very smooth, you even could not
recognize the layers, but small height means there are much more layers to go,
and that means much more time. So we 0.2mm is recommended, you can try
0.1mm for better printing, and 0.3mm for fast printing, please do not make it
more then 0.3mm, unless you get a nozzle bigger then 0.4mm.
wall thickness
The number is normally times of the nozzle diameter, minimum is one time of
