8
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
11. Warranty
LIMITED WARRANTY AND EXCLUSIONS
Tripp Lite strives to produce quality products at reasonable prices. If you are not satisfied with our product because of a defect, we will repair or replace the defective part or parts
free of charge for a period of one year from the date of purchase. In the event you claim that the product contains a defect, simply notify Tripp Lite of the defect, and we will arrange
for repair or replacement. The sole and exclusive remedy against Tripp Lite relating in any way to a product defect shall be the repair or replacement of defective parts as provided
for under this LIMITED WARRANTY. No other remedy, including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any
other incidental or consequential loss, is available. This LIMITED WARRANTY shall not be deemed to have failed of its essential purpose so long as Tripp Lite is willing and able to
repair or replace defective parts in the manner prescribed in this LIMITED WARRANTY.
Certain integrated products, which are not manufactured by Tripp Lite, will be warranted by the applicable manufacturer. These warranties shall be between the
manufacturer and the user. Terms and conditions may vary. These integrated products include, but may not be limited to, the following products: Batteries, Inverters
and UPS Systems.
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended.
Any action for breach relating to the sale of a Tripp Lite product must be commenced within one year after the cause of action has been accrued.
THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, AND ALL SUCH WARRANTIES ARE EXCLUDED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.
19-03-376 93-3979_RevA
10. Reference Materials
NOTES:
1. “SW1” UPS INPUT BREAKER.
2. “SW2” MAINTENANCE BYPASS BREAKER.
3. “SW3” MAINTENANCE ISOLATION BREAKER.
4. ALL INTERNAL CONNECTIONS BETWEEN “SW1”, “SW2” AND “SW3” ARE MADE USING COPPER BUS BARS.
5. 600A RATED NEUTRAL BUS PROVIDED WITH MECHANICAL LUGS THAT ACCEPT A TOTAL OF (4) #6 – 500 MCM CABLES.
6. GROUND LUG ACCEPTS (3) #6 – 500 MCM CABLES.
7. MECHANICAL LUGS USED FOR THE UTILITY INPUT AND THE OUTPUT LOAD HAVE THE SAME WIRE RANGE AS THE CIRCUIT BREAKERS.
8. THIS DRAWING IS TO BE USED FOR ELECTRICAL PURPOSES ONLY AND DOES NOT REPRESENT THE ACTUAL MECHANICAL LAYOUT OF THE EQUIPMENT.
TO UPS
BYPASS UNIT
TO UPS
AC OUTPUT
OUTPUT TO LOAD
UTILITY INPUT
CIRCUIT BREAKER SUMMARY
BREAKER TYPE
BREAKER MODEL
TRIP
AIC
WIRE RANGE
CUTLER HAMMER SERIES C
HLD3600
600A
65K @ 480VAC
(2) 400 - 500
WIRE RANGE & TORQUE VALUE SUMMARY
MECHANICAL LUG CONNECTIONS
WIRE RANGE
TORQUE VALUE
INPUT
#4 - 500 MCM
375 in-lbs. (42.4 Nm)
OUTPUT
#4 - 500 MCM
375 in-lbs. (42.4 Nm)
NEUTRAL
#6 - 500 MCM
375 in-lbs. (42.4 Nm)
GROUND
#6 - 500 MCM
375 in-lbs. (42.4 Nm)
