10
Installation
The cooling unit will now begin cooling when the temperature reading at E2MT
equals or exceeds the set-point value you entered. When the temperature falls
below this set-point, the unit will stop cooling. If the “Always On” checkbox is
checked, the fans will remain running when the unit stops cooling. If the “Always
On” checkbox is unchecked, the fans will shut off and the unit will shut down.
Once the temperature reaches the set-point again, the unit will restart and begin
cooling until the temperature reported by E2MT returns below the set point.
Note:
This cycle will continue indefinitely until you select STOP from the PowerAlert Device
Manager interface.
18-08-472-93387D.indb 10
8/30/2018 10:12:00 AM
