background image

8

5-Year Limited Warranty 

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 5 years from 

the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, at its sole 
discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS 
WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, 

INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY 
EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states 
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you 
specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction.)
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual 

applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific 
application.

Warranty Registration 

Visit tripplite.com/warranty today to register the warranty for your new Tripp Lite product.You’ll be automatically entered into a drawing for a chance to win a FREE  

Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Regulatory Compliance Identification Numbers 

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be 
found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to 

the series number. The series number should not be confused with the marketing name or model number of the product.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

7. Specifications

8. Storage and Service

9. Warranty & Warranty Registration

Model

SR12UBFFD

SR24UBFFD

Dimensions [H x W x D]

25 x 23.63 x 38.6 in. (637 x 600 x 980 mm)

46.8 x 23.63 x 38.6 in. (1188 x 600 x 980 mm)

Unit Weight

95 lb. (43 kg)

209.4 lb. (95 kg)

Load Capacity

250 lb. (113 kg) stationary or rolling

500 lb. (226 kg) stationary or rolling

Mounting Depth (Adjustable)

3 to 32.5 in. (76 to 826 mm)

3 to 32.5 in (76 to 826 mm)

Storage 

The enclosure should be stored in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, 

conductive contaminants, dust and direct sunlight. Store the enclosure in its original shipping container if possible.

Service 

Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs are also 

available from Tripp Lite. For more information on service, visit tripplite.com/support. Before returning your product for service, follow these steps:
1. Review the installation and operation procedures in this manual to insure that the service problem does not originate from a misreading of the 

instructions.

2. If the problem continues, do not contact or return the product to the dealer. Instead, visit tripplite.com/support.
3. If the problem requires service, visit tripplite.com/support and click the Product Returns link. From here you can request a Returned Material 

Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit’s model and serial numbers, along with 

other general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any damages (direct, indirect, special 

or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. 
Products shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the 

outside of the package. If the product is within its warranty period, enclose a copy of your sales receipt. Return the product for service using an 

insured carrier to the address given to you when you request the RMA.

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

20-06-246  93-331E_RevD

Summary of Contents for SmartRack SR12UBFFD

























Reviews: