11
IEC-320-C20
CONTROLLABLE LOAD 1
CONTROLLABLE LOAD 2 UNSWITCHED
IEC-320-C13
IEC-320-C19
3. Operation
3.4 Rear Panel
Accessory Card Slot:
Remove the cover panel from this slot to
install an optional internal WEBCARDLX accessory, sold separately.
WEBCARDLX provides a network interface for monitoring and
control via SNMP, Web or telnet, enabling remote reboots,
shutdowns and more.
External Battery Pack Connector
(Configuration Varies By Model)
Fan:
The fan cools the UPS system’s internal components. It is
always on when line power is present, even if power to the UPS
system’s outlets is turned off.
Input Power Cord:
This UPS system requires a user-supplied
power cord. This power cord should have an IEC-320-C19
connector on one end and a plug appropriate for your local site's
utility outlet on the other end.
AC Outlets (Configuration Varies By Model):
These outlets
provide connected equipment with pure sine wave AC output
derived from the AC line during normal operation and derived from
battery power during blackouts and severe brownouts or
overvoltages. Output power is filtered to protect connected
equipment against damaging surges and line noise.
The outlets are divided into numbered load banks, as labelled on
the unit. Using included PowerAlert software and cabling or an
optional WEBCARDLX, load banks may be individually turned off
and on from a remote location, allowing users to reset or reboot
connected equipment.
17-06-040-932882.indb 11
6/29/2017 10:33:32 AM
