8
Features
Technical Support
PS/2 Port:
Use this port to connect a Tripp Lite ENVIROSENSE
environmental sensor to provide remote temperature/humidity
monitoring and a dry contact interface to control and monitor
alarm, security and telecom devices. Visit www.tripplite.com for
ordering information.
Note:
Do not connect a keyboard or mouse to this port.
Mini-DIN Serial Port:
Use this port to provide a direct terminal
connection to a computer with a terminal emulation program. A
serial cable (part number 73-1025) is included with the PDU. If
you need to order a replacement cable, contact Tripp Lite
Customer Support at www.tripplite.com/support.
Ethernet Port:
Use this RJ-45 jack to connect the PDU to the
network with a standard Ethernet patch cable. The Status LED
A
and Link LED
B
indicate several operating conditions, as shown in
the table below.
This port is not compatible with PoE (Power Over
Ethernet) applications.
Network Operating Conditions
A
Status LED Color
Off
Card Not Initialized
Steady Green
Card Initialized and Operational
Flashing Amber
Error - Card Not Initialized
B
Link LED Color
Off
No Network Connection
Flashing Amber
100 Mbps Network Connection
Flashing Green
10 Mbps Network Connection
SNMP Reset Button:
The SNMP reset button
C
is recessed in a
small opening between the Link and Status LEDs. To reset your
SNMPWEBCARD, use a small tool to press the reset button for 3
seconds. Rebooting the network card will not erase network
settings or interrupt AC power.
Website: www.tripplite.com/support
E-mail: [email protected]
A
B
C
15-04-186-93341D.indb 8
4/16/2015 9:19:52 AM
