4
Front Panel:
Rear Panel:
Product Features
1
Gigabit Ethernet Ports:
These 24 twisted-pair RJ-45 ports support auto-negotiable
10/100/1000 Mbps and auto MDI/MDIX cross-over detection functions for true “plug and
play” capability. There are two green LEDs per RJ-45 port. The left LED blinks when the port
is active. The right LED is off at 10 and 100 Mbps and lights up at 1000 Mbps, remaining lit
while at that speed.
Note:
Not compatible with PoE (Power Over Ethernet) applications.
2
Power ON/OFF LED:
An LED illuminates to indicate that the switch is receiving power.
3
MiniGBIC:
The MiniGBIC (gigabit interface converter) ports are connection points for
MiniGBIC modules, so the unmanaged switch can uplink to other switches using optical fiber.
The MiniGBIC interfaces are combination ports, each shared with one other RJ-45 port. When
the MiniGBIC is active, the adjacent RJ-45 port will be disabled. The LEDs on the adjacent
RJ-45 ports will react to the MiniGBIC interface traffic.
4
NEMA 5-15R Outlets:
This switch includes 12 NEMA 5-15R receptacles.
5
Circuit Breaker:
If the current drawn by the equipment connected to the PDU exceeds the
Maximum Load Rating, the 12A thermal circuit breaker will trip to prevent possible damage
and its plunger will pop up. If this happens, disconnect excess equipment and allow the
breaker to cool at least one minute before depressing the plunger to reset the unit.
6
Input:
AC power input from a connected UPS system or alternate source.
7
Grounding Lug:
Use this screw to connect your switch to ground.
1
3
4
5
6
2
7
16-05-215-933344.indd 4
5/18/2016 10:32:41 AM
