Tripp Lite NGI-S05C2POE4 Owner'S Manual Download Page 73

Page: 73 / 152

5.2.2.2.

Web Configuration

For devices that do not support ONVIF or LLDP, the user can input the device’s MAC address.

The Switch will then discover the device and display it on the Lamungan Map.

Parameter

Description

Manual Registration Settings

Type

The kind of devices connected to the Switch.

MAC Address

The MAC address of the device.

The IP address of the device.

Product Name

The product name of the device.

System Name

The system name of the device.

Apply

Click

Apply

to take effect the settings.

Refresh

Click

Refresh

to begin configuring this screen afresh.

Manual Registration Table

Type

The kind of devices connected to the Switch.

MAC Address

The MAC address of the device.

The IP address of the device.

Product Name

The product name of the device.

System Name

The system name of the device.

Action

Whether to delete entered device or not.

Summary of Contents for NGI-S05C2POE4

























































































































































Search results

Summary of Contents for NGI-S05C2POE4

Reviews:

Related manuals for NGI-S05C2POE4

Brands by name

Popular brands

Tripp Lite NGI-S05C2POE4, Owner'S Manual

Search results

Summary of Contents for NGI-S05C2POE4

Reviews:

Related manuals for NGI-S05C2POE4

Brands by name

Popular brands