Tripp Lite NGI-M05-C1, Owner'S Manual, Page: 192 / 254

192
configure no dot1x username <STRING> This command deletes the user
account for local authentication.
7.3.1.2. Web Configurations
Parameter Description
Global Settings
State
Select Enable to permit 802.1x authentication on the Switch.
Note: You must first enable 802.1x authentication on the Switch
before configuring it on each port.
Authentication
Method
Select whether to use Local or RADIUS as the authentication
method.
The Local method of authentication uses the “guest” and “user”
user groups of the user account database on the Switch itself to
authenticate.
However, only a certain number of accounts can exist at one
time.
RADIUS is a security protocol used to authenticate users by
means of an external server instead of an internal device user
database that is limited to the memory capacity of the device. In