Tripp Lite NGI-M05-C1, Owner'S Manual, Page: 111 / 254

111
interface vlan-stacking port-based role
(tunnel|access|normal)
This command sets VLAN stacking
port role.
interface vlan-stacking port-based spvid
<1~4096>
This command sets the service
provider’s VID of the specified port.
interface vlan-stacking tunnel-tpid index
<1-6>
This command sets TPID for a Q-in-Q
tunnel port.
configure interface range
gigabitethernet1/0/PORTLISTS
This command enters the if-range
configure node.
if-range vlan-stacking port-based priority
<0~7>
This command sets the priority in port
based Q-in-Q.
if-range vlan-stacking port-based role
(tunnel|access|normal)
This command sets VLAN stacking
port role.
if-range vlan-stacking port-based spvid
<1~4096>
This command sets the service
provider’s VID of the specified port.
if-range vlan-stacking tunnel-tpid index
<1-6>
This command sets TPID for a Q-in-Q
tunnel port.
6.3.4.2.2. Web Configurations
Parameter Description
Port-based Q-in-Q Settings
Port Selects a port or a range of ports which you want to configure.
Role
Selects one of the three roles, Normal and Access and Tunnel ,
for the specific ports.
SPVID Configures the service provider’s VLAN.
Priority Configures the priority for the specific ports.