8
Administrator Setup
4. Click the
Network
icon on the side of the page to open
Network Settings
.
5. By default, the
Obtain IP address automatically [DHCP]
checkbox is checked. To set
a fixed IP address, check the
Set IP address manually [Fixed IP]
check box in the
IPv4 or IPv6 settings section, depending on your network.
6. The
IP Address, Subnet Mask
and
Default Gateway
fields will be activated upon
checking the
Set IP address manually [Fixed IP]
checkbox. Fill in these fields with
information appropriate for your network.
3. You will be directed to a login page with Username and Password prompts. The
default Username is
administrator
and the default Password is
password
. The
Admin Utility Main Page will open upon entering the Username and Password.
17-11-282 93-373C.indd 8
12/5/2017 4:00:27 PM