2
Introduction
Package Includes
Important Safety Warnings
When used with the 98-121 batteries (available separately from Tripp Lite), the BP-260
External Battery Enclosure provides extended runtime capability for 12V or 24V Inverter/
Charger Systems. Multiple BP-260 enclosures can be daisy-chained to further increase
runtime. The BP-260 battery enclosure accepts up to two 98-121 battery modules.
(1) Heavy-duty Steel Enclosure
(4) 1/4-20 x 3/4” Hex Head Nuts and Bolts
(1) 30” #6 Gauge Red Cable with Ring Tongue Terminals
(1) 30” #6 Gauge Black Cable with Ring Tongue Terminals
(1) 10” #8 Gauge Red Cable with Ring Tongue Terminals
(1) 10” #8 Gauge Black Cable with Ring Tongue Terminals
(1) 5” White Fusible Cable with Ring Tongue Terminals
(2) Terminal Insulators
(1) 12V Label (for 12V DC System Identification)
SAVE THESE INSTRUCTIONS!
This Owner’s Manual contains important instructions and warnings that must
be followed during the installation and operation of the BP-260 External
Battery Enclosure. The Owner’s Manuals included with compatible products
(internal battery packs) contain additional safety instructions that must be
followed during installation and operation. Failure to heed these instructions
may cause permanent damage to the inverter/charger system (voiding its
warranty) and create a potential for serious personal injury or death from lethal
high voltage.
• Do not use Tripp Lite Inverter/Charger Systems or External Battery Enclosure in life
support applications in which a malfunction or failure of a Tripp Lite Inverter/Charger
Systems or External Battery Enclosure could cause failure or significantly alter the
performance of a life support device.
• Potentially lethal voltages exist within this unit as long as the battery supply is
connected. Service and repair should be done only by trained personnel. During any
service work, the Inverter/Charger system should be turned off.
17-10-206-930750.indb 2
10/31/2017 1:13:23 PM
