8
3
If using a B132-002A-2 or B132-004A-2 model, connect the
external power supply to the unit and plug it into a Tripp Lite Surge
Protector, Power Distribution Unit (PDU) or Uninterruptible Power
Supply (UPS). For the B130-101A-MR and B130-101A-SR models,
connect the included Micro USB cable to the unit and plug it into the
USB port on a computer or a USB wall outlet. Wait 10 seconds for
the EDID information to be copied, then disconnect the monitor and
proceed per the installation instructions in this manual.
Note:
The B130-101A-MR and B130-101A-SR transmitter units feature an internal
EDID LED that blinks to indicate a scan is taking place. The LED will stop blinking
and glow solid when the scan is complete. When a monitor is connected, its EDID
information will be copied and stored on the transmitter unit. If no monitor is
connected, the scan will still take place and the Orange LED will illuminate, but no
EDID information will be copied. The information stored on the transmitter unit will
remain unchanged.
4
You can verify that the EDID information was copied from your
computer’s Display Settings screen. If the model name of the monitor
that you copied is shown in the Display field, the EDID information
has been copied successfully.
Note:
You may need to click on the
Detect
button.
Installation
continued
15-04-118-9333BE.indd 8
4/8/2015 10:35:10 AM
