5
Extender Kit Installation
7.
Turn on the power to the HDMI source and HDMI display. The green
RJ45 LEDs on the transmitter and receiver units will illuminate to
indicate they are receiving power. The orange RJ45 LEDs on the
transmitter and receiver units will illuminate to indicate they are
receiving a signal from the source.
8.
If necessary, adjust the Equalization control on the receiver unit to
improve the video image.
Note:
An improper Equalization setting can cause the monitor to display
no picture at all. Try each Equalization setting until an acceptable image is
displayed.
16-12-182-9334F6.indb 5
1/4/2017 4:40:05 PM
