8
Installation
7.
Once both bare wires are connected, secure the PCBA
board to the enclosure using the included mounting screws.
Then, attach the grounding wire to the available screw on
the PCBA board.
Note:
Make sure you connect your source to the cable end and your
PoE-compliant device to the equipment end.
8.
Screw the front cover to the back portion of the enclosure
using the included unit cover screws.
9.
The connected PoE device is now protected.
21-02-277-933D64-Book.indb 8
21-02-277-933D64-Book.indb 8
7/27/2021 11:40:29 AM
7/27/2021 11:40:29 AM
