87
6. Menu Options
• Thirdly, after the firmware has been stored, the B050-000 will reset automatically. After about one minute you
will be redirected to the Login page and requested to login once again.
Unit Reset
Figure 6-40. Unit Reset
This section allows you to reset specific parts of the device. This involves the both keyboard and mouse, the video engine
and the B050-000 itself. Resetting the card itself is mainly needed to activate a newly updated firmware. It will close all
current connections to the administration console and to the Remote Console. The whole process will take about half a
minute. Resetting subdevices (e.g. video engine) will take a few seconds only and does not result in closing connections.
To reset a certain B050-000 functionality click on the button “Reset” as displayed in Figure 6-40.
Note:
Only the user “super” is allowed to reset the B050-000.
Warning: This process is not reversible and might take some minutes. Make sure the B050-000's power
supply will not be interrupted during the update process, because this may cause an unusable device.
Warning: The three-stage firmware update process and complete consistency check make a mistake in
updating the firmware almost impossible. However, only experienced staff members or administrators should
perform a firmware update. Make sure the B050-000's power supply will not be interrupted!
