8
Configuration
5
Remove the door hinges from the enclosure, rotate them
180 degrees and attach them on the opposite side of the enclosure.
Note:
The alternate door hinge attachment points have plastic plugs in the
screw holes. Remove the plugs and insert them in the original door hinge
attachment points.
6
Unscrew the 2 hinge mechanisms from the hinge openings inside
the door, then reattach each of them using the set of screw holes
immediately opposite their original position.
7
Rotate the door 180 degrees and reinstall it on the enclosure.
Remember to connect the ground wire to the inside of the door, using
the attachment point nearest the hinge at the top of the door. The
attachment point is marked with the ground connection symbol
.
8
Reinstall the door handle.
5
6
7
8
Summary of Contents for AG-0545
