6
Configuration
Before proceeding with configuration, make sure the unit is properly assembled and secured to the rack
enclosure. Refer to the Assembly Instructions document for step-by-step instructions.
Ground Connection
The unit includes multiple threaded grounding points labeled
. To establish a ground, choose a grounding point and use the
included M6 screw to connect the frame of the unit directly to your facility’s earth ground connection with an 8 AWG
(3.264 mm) wire. Make sure to route the ground wire through the enclosure’s frame to ensure unhindered door operation.
WARNING: Attach each enclosure to earth ground separately. Do not use the enclosure without an earth ground
connection.
Adding or Removing Front and Rear Doors
WARNING: Do not attempt to add or remove doors without assistance.
90°
1
2
3
Removing Door
1
Disconnect the door’s ground wire.
2
Open the door until it is perpendicular (90 degrees) to the front
of the enclosure.
3
Lift the door from the hinges and remove it from the enclosure.
To Reinstall Door, Reverse Steps 1-3
Summary of Contents for AG-0545
