_____________________________________________________________________
B096-016 B096-048 and B092-016 User Manual
Page 142
Specify the address and name of the downloaded Firmware Upgrade File, or
Browse
the local
subnet and locate the downloaded file
Click
Apply
and the Console Server appliance will undertake a soft reboot and commence
upgrading the firmware. This process will take several minutes
After the firmware upgrade has completed, click
here
to return to the Management Console.
Your Console Server will have retained all its pre-upgrade configuration information
11.3 Configure Date and Time
It is recommended that you set the local Date and Time in the Console Server as soon as it is configured.
Features like Syslog and NFS logging use the system time for time-stamping log entries, while certificate
generation depends on a correct Timestamp to check the validity period of the certificate.
Select the
System: Date & Time
menu option
Manually set the
Year
,
Month
,
Day
,
Hour
and
Minute
using the
Date
and
Time
selection boxes,
then click
Apply
The Console Server can synchronize its system time with a remote time server using the Network Time
Protocol (NTP). Configuring with the NTP time server ensures that the Console Server clock will be
accurate soon after the Internet connection is established. Also, if NTP is not used, the system clock will
be reset randomly every time the Console Server is powered up. To set the system time using NTP:
Select the
Enable NTP
checkbox on the
Network Time Protocol
page
Enter the IP address of the remote
NTP Server
and click
Apply
Specify your local time zone so the system clock can show local time (and not UTP):
Set your appropriate region/locality in the
Time Zone
selection box and click
Apply
Summary of Contents for 93-2879
Page 59: ...59...
