11/65
3.2. MONITORRING
The basic information of system is indicated on the lower part of monitor.
Quad monitoring screen < 4 CH > 9 Split monitoring screen < 8 CH >
A symbol
indicates record status on current HDD. A symbol
indicates motion sensor. A
symbol
indicates that sensor is set on system and activated. The lower part of full screen in
DVR shows whole condition of system. A symbol
indicates that DVR monitoring mode. A sym-
bol
indicates that system is connected with user using client program on computer through
network. A symbol
indicates that alarm is set on system and activated. A symbol % indicated
that the capacity of HDD used.
A symbol
indicates on right of % indicates that 100% of HDD, then it erases data from HDD
and records data at the same time. In this condition, HDD has always full of data 100%. [07/03/08
16:01:42] shows time of system.
The system recognizes Video input signal automatically and system shows video source on screen.
In case of no input signal, system shows
mark on screen. But if the camera has connected
with system and shows blue screen, please check the connection between system and cameras.
Press the channel button, the selected channel shows on entire screen. If you want to show 9-split
screen, press the [ENTER] button.
