Changing the Units of Measure
Press
and hold the R button until the word ‘Unit’ appears.
Now short press the power button to change the units for the
selected measurement mode.
Short press
to save the selection and move to the
secondary function, if applicable (temperature, for example).
Short press the power button to change the secondary function
units, if applicable, and then short press
to save.
See units list below:
o
Sound dB
o
Temperature units oC, oF (for air, dew point, wet bulb,
heat index, and Type K)
o
Light units
Foot-candles, LUX
Reversible Backlight LCD
The LCD display automatically reverses its presentation
orientation depending on measurement mode. This is to match the
display orientation with the selected sensor mode (light or
environmental measurements such as Wet bulb temperature).
The LCD is equipped with backlighting for easier viewing,
especially in dimly lit areas. With the meter powered ON, short
press the power button to turn ON the backlight. The backlight will
power OFF after several seconds.
Display Hold
Short press the H (Hold) button to freeze and unfreeze the displayed
reading. The Display Hold mode is not operational when using the MAX-
MIN Recording mode.
