Operation
Meter Power
1.
Three (3) 1.5V ‘AAA’ batteries power the meter. The battery
compartment is located on the rear of the meter secured by one
flat head screw.
2.
Short press the power button to switch the meter ON. The
meter will begin displaying readings for the mode selected.
3.
Long press the power button to power OFF the meter.
Auto Power OFF (APO)
In order to conserve battery life, the meter will automatically switch
off after approximately 10 minutes of inactivity. Note that APO does
not function while the meter is in the MAX -MIN Recording mode
(short press the R button to access the MAX-MIN Recording mode).
Selecting the Operating Mode
Long press the M (Mode) button to scroll through the list of functions.
When the desired mode is displayed, release the button. See display
icons with brief descriptions below:
•
db
Sound Level(dBA)
•
rH
Relative Humidity in % and Air temperature
•
dPDew point temperature
•
_EtWet bulb temperature
•
HEATt
Heat index temperature
•
LigHt
Light intensity measurements
•
tYPE
Type K thermocouple temperature (must attach thermocouple
to meter)
•
