background image

WARRANTY POLICY

POWER SPOTTER 4 SPOTTER/EXTRACTOR

The 

Triple S 

Power Spotter 4 has been manufactured, tested and inspected in accordance with specific engineering requirements

and is WARRANTED to be free from defects in workmanship and materials as follows:

Five (5) years parts, One (1) year labor – Rotational molded tanks.
One (1) year parts & labor  – All other components unless excluded below.

This warranty extends to the original user/purchaser and only when used, operated and maintained in accordance with 

Triple S’

Operating and Maintenance instructions.

This warranty does not apply to certain wear parts of the machine such as electrical cords, carbon motor brushes, hoses,
tools, etc., nor does it apply to damage or failure caused by improper use, abuse or neglect.  Warranty credit or replacement of
return parts including motors, tools, etc., is subject to incoming inspection of those items.

To secure repair under this warranty, the following procedure should be taken:

The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges
prepaid.  If unable to locate the Dealer, you may contact 

Triple S 

at the address listed herein for the location of the nearest

Triple S 

repair center or agent or for other instructions pertaining to your warranty difficulty.

Upon compliance with the above warranty procedure, all warranted repairs would be completed at no additional charge or
cost to the user.

Only 

Triple S

 or its authorized dealers and agents may make no charge warranty repairs on this product.  All others do so at

their own risk.

This warranty limits 

Triple S 

liability to the repair of the product and/or warranted parts replacement and does not include

incidental or consequential damages arising from the use of a 

Triple S 

machine whether defective or not.

This warranty is in lieu of all other expressed or implied warranties and is extended to the original purchaser/user.

07/09

2 Executive Park Drive  Billerica, MA  01862

Ph: (800) 323-2251  • Fax (978) 667-9360

www.triple-s.com

Summary of Contents for POWER SPOTTER 4




















Reviews: