10
Table 5.1-1 - Step-by-Step Instructions to Install the USB GUI
Step #
Description
1
Insert the disk into the Windows computer’s DVD drive, navigate into the
USB GUI
folder and verify the file structure of the CD-ROM looks as shown in Figure 4.1-1.
2
Double click on the
Install_ASE10XX GUI
file and the Windows User Account
Control message shown in Figure 4.1-2 will appear. Click Yes to continue to install
the software.
3
While the installation is in progress for approximately 4 minutes, the small window
shown in Figure 4.1-3 will appear to indicate the installation process is in progress.
4
Once installation is complete, the window in Figure 4.1-4 will be shown to remind
the user to restart the computer at the earliest convenience. The user can click OK to
continue, the computer will not restart until the user specifically commands a
Windows restart.
5
Whenever convenient, restart the computer.
6
Proceed to paragraph 5.2 of this document to continue the setup procedure.
Figure 5.1-1 - ASE-1019 USB GUI Installation Folder Contents on CD-ROM
Figure 5.1-2 - Windows User Account Control Notification
Figure 5.1-3 - USB GUI Installation Progress Window
