16
IP Address
Reset Button
Figure 6.2-1 - AMP-1030P IP Address Reset Button Location
7.0
USB GUI Operation
7.1
Getting Started with the USB GUI
Once the USB GUI application has been started using the steps described previously in paragraph
5.2, the AMP-1030P Main Menu will appear. This window remains visible until the application is
closed by clicking the “X” inside the red box in the upper right area of the Main Menu or by
removing the USB cable from the AMP-1030P module. This GUI application can only be active and
running when an AMP-1030P is physically connected to the computer using a USB cable.
Otherwise, the application will automatically close if no module connection is detected.
The Main Menu window can be moved and repositioned on the screen by clicking the bar at the
top of the window and dragging it to a different location. The size of this window cannot be
changed.
By clicking on Device Info, a new window is opened to show specific module information such as
the model number, part number, serial number, firmware and GUI revisions. This window cannot
be repositioned and is closed by clicking the red box in the upper right corner.
Figure 7.1-1 shows an example Main Menu window with several key areas highlighted.
