14
If desired, the AMP-1030P can be fully controlled using only a standalone computer and its HTML
browser. If that is the desired method of control, please proceed to paragraph 8.0 which describes
the various screens, control, and status capable of being implemented with the HTML browser.
In order to connect the AMP-1030P module to an Ethernet router for remote control and status,
setup the module as described in Table 6.1-2 if a Static IP address is desired, or as described in
Table 6.1-3 if a Dynamic IP address is desired.
Table 6.1-2 - AMP-1030P Ethernet Port Setup for Operation with Ethernet Router
Using Static IP
#
Description
1 Click on
Ethernet Setup
at the top menu bar.
2 Select
Static
for the
Ethernet Mode
drop down menu.
3 Type in the new, desired
IP Address
,
IP Subnet
, and
IP Gateway
settings which are to be
used with your Ethernet Router.
4 Once all the desired settings are correct, click
Apply Settings
. Please note that once
Apply Settings is clicked, you will no longer be able to communicate with the module until
it is connected to the Ethernet Router on which the new settings are appropriate. If there
are ever problems accessing the module, the AMP-1030P can always be placed back into
its factory default state for the Ethernet Settings using the IP Address Reset button on the
bottom side of the module. See paragraph 6.2 for more details.
5 Connect the Ethernet cable from the Ethernet Router directly to the AMP-1030P module.
6 Using a computer which can also access this Ethernet Router, open a Chrome, Firefox, or
Internet Explorer browser window.
7 In the browser’s URL window, type the newly entered Static IP address of the module and
wait for the AMP-1030P main screen to appear.
8 Proceed to paragraph 8.0 which describes the various screens, control, and status capable
of being implemented with the HTML browser.
