ELIMINATOR OWNER’S MANUAL
Page 7
V.
ON/OFF Switch/Speed Control – Speed/Airflow adjustment:
A.
All Eliminator units are equipped with a two-position toggle switch, which is located on the
front side of the electrical junction box on top of the unit.
B.
The top position is “OFF”. The bottom position is “ON”. (See Figure 4).
C.
The speed control enables the adjustment of airflow at any setting within the recommended
performance range. The speed control knob is located on side of the prefilter bracket.
D.
Electrical power to the fan may be disconnected by moving the toggle switch to the top or
“OFF” position.
E.
Airflow/speed is adjusted by rotating the knob.
F.
Clockwise
→
lowers the speed.
G.
Counter-Clockwise
→
increases the speed.
H.
Fully rotating the speed control knob to the left or counter-clockwise will turn the unit off.
Figure 4
Note:
When turning the unit “ON” from the “OFF” position of the speed control, the fan is at
the highest speed. Turning the speed control knob clockwise will lower the speed.
