Trinnov Audio ST2 Pro, Quick Start Manual

Page: 19 / 28

Quick start
19
Make sure to unplug your controller (if any) on the analog inputs of the ST2 Pro.
The microphone is on a microphone stand and ready for usage.
A few things to verify before calibrating regarding the measurement microphone position:
• The microphone needs to be positioned facing the center between the left and right
speakers.
• The center of the microphone is the red LED, it needs to be set forward.
• The capsules need to be placed at about ear level, located where you would be mixing
(height/ distance from your ear to the wall).
• The L and R speakers should be physically set 30° each from the center of the
measurement (you will be able to see the results after the calibration. Please refer to the
post-calibration chapter).
After setting it up as accurately as possible, it is time to calibrate.