Trinnov Audio ST2 Pro, Quick Start Manual

Page: 11 / 28

Quick start
11
The unit’s ID connected to the interface, and its current software version is located at the bottom.
In order to access the Optimizer settings, hit the Icon located at the bottom right of the app.
To get information about using the Optimizer settings, please refer to the Chapter 3 of this
Quickstart manual.
2.2 | LOCATING YOUR ST2 PRO IP ADDRESS
Each ST2 Pro processor includes a dedicated web server and, therefore, the
GUI can be accessed from a networked device with a web browser interface
such as a desktop computer, laptop, smartphone, tablet, etc.
If both your computer and ST2 Pro are connected on the same network, you can access the
interface through your web browser (Chrome preferred). It requires is to have your ST2 Pro
updated to its latest software release.
Date : December, 2020 Version: 3.8.40
First, locate your ST2 Pro IP address.
There are 2 ways of achieving this:
• With a physical screen plugged to it.
You will require an external monitor, a keyboard, and a mouse.
Plug them all to the motherboard part of the ST2 Pro (see the previous chapter on setting
up your ST2 Pro). Go to the Network settings to get the IP address.
• If you have a “Trinnov Remote” plugged in, navigate up to the network page.
In your web browser address bar, type in “http:// <ip> /vnc.html
Replace <ip> with the ST2 Pro address.
You are connected to the interface.
Note: Also, as a Mac user, your ST2 Pro will be automatically listed in the “network”. You can double-click on
the device, then, select “share screen”.