2.2 REMOTE TRIGGERS
Use the remote trigger to connect to a compatible preamplifier, source device or other product
with 5 to 12 VDC output.
When so interconnected, the Amplitude
8m
will turn on and off in response to the signals
received from the source device. The trigger circuit requires a steady-state signal. Units that
send a pulse signal for turn-on and turn-off will not work with the Amplitude
8m
.
The trigger output will pass through the steady-state signal received on the trigger input to
switch downstream devices on and off.
NOTE: Make sure to use a mono TS mini-jack cable for 12V triggers
12
