ASSEMBLY INSTRUCTIONS
Note: There will be a very small gap in-between two locked SLIP SLEEVES (E)
—
this is normal.
© 2020 TRINITY - 800.985.5506
2
A (5)
E (10)
For easiest assembly, do not connect TOP POLES (C),
MIDDLE POLES (B), and BOTTOM POLES (A) until
instructed. Once connected, these will be posts for the
Rack.
Note that each POLE (A+B+C) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (E) has
raised horizontal lines inside designed to lock them in
place on POLE (A+B+C).
On BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (E) at
desired height
no higher than
3
rd
indentation from
bottom. Please make sure arrow faces up and word
“TOP” is right side up.
Slide pair of SLIP SLEEVES (E) until you hear a click to
confirm the pair is locked onto BOTTOM POLE (A). Do this
for each BOTTOM POLE (A) and make sure height is
identical for each BOTTOM POLE (A). Do NOT place more
than one pair on each BOTTOM POLE (A) at a time.
STEP 1
STEP 2
Place SHELF (D) on its side and slide each
BOTTOM POLE (A) through each corner
cylinder on SHELF (D). Make sure SHELF (D)
corner cylinders are positioned over SLIP
SLEEVES (E).
Stand the unit upright.
Note:
•
Level side of SHELF (D) is TOP side (TRINITY
logo on corner cylinders should be right-
side up.)
•
Use a rubber mallet, if needed, to secure
SHELF (D).
D (1)
