•
Registered With/Without Postal Insurance
- If this service is selected, the
scale prompts you to enter the Registered Amount. If the amount entered is 0,
the scale will not include postal insurance. If any other amount is entered, the
scale includes postal insurance.
•
Certified
-
If this service is selected, the appropriate fee for the transaction is ap-
plied to the displayed rate.
•
Return Receipt
-
If this service is selected, the appropriate fee for the transac-
tion is applied to the displayed rate.
•
Collect On Delivery (C.O.D.) -
If this service is selected, the scale displays “
En-
ter Val = 0”
. Once the value is entered, the appropriate fee for the transaction
is applied to the displayed rate.
•
Insurance -
If this service is selected, the scale displays “
Enter Val = 0”
. and
allows you to enter the insured amount. After an amount is entered the appropri-
ate fee for the transaction is applied to the displayed rate.
•
Delivery Confirmation (0)
-
If this service is selected, the appropriate fee for the
transaction is applied to the displayed rate.
3.2.2.2 ZIP/ZONE
KEY
The ZIP/ZONE key is used to change the current ZIP code or zone. If three digits
are entered, the scale assumes a new ZIP code has been entered. If a one or two
digit code has been entered using the ENTER key, the scale assumes a new zone
has been entered.
3.2.2.3 CLEAR (NO) KEY
The CLEAR/RESET key is used to clear the current entry, clear the special service
fees applied or to answer a YES/NO question. If an incorrect data entry is made,
pressing this key will only clear the current data from the display.
3.2.2.4 ZERO SCALE KEY
The ZERO SCALE key is used to Zero the scale. When this key is selected, the
scale zeros the weight.
3.2.2.5 ENTER (YES) KEY
The ENTER (YES) key is used to accept data when in data entry mode or answer a
YES/NO question. This key can also be used to freeze or “hold” the current display.
This is useful for oversized packages that cover the operator’s view of the screen.
3.2.3 FUNCTION
KEYS
The function keys are used to access less frequently used scale operations.
3.2.3.1 PRINT
KEY
The PRINT key sets and trips the postage meter – all in one step
3.2.3.2 PIECE COUNT KEY
The Piece Count function puts the scale into a counting mode. Refer Section 5.1 for
the Piece Count operation procedure. Note that the counting mode is not available
with legal for trade applications.
3.2.3.3 TRUE RATE KEY (9)
The True Rate Key is used to display the actual rate without the additional handling
charge. See Section 6.2.2 for more information about handling charges.
Page 3-3