TMCM-3230 Hardware Manual • Hardware Version V1.30 | Document Revision V1.20 • 2019-MAR-01
8 / 22
3 Mechanical and Electrical Interfacing
3.1 TMCM-3230 Dimensions
The dimensions of the controller/driver unit are approx. 80mm x 50mm. There are three mounting holes
for M3 screws and two slots on each side for optional card holders.
Horizontal
Connector:
68-Pin Connector
(4/46)
(0/0)
(80/50)
(76/46)
(4/4)
(0/21.9)
(0/24.4)
(0/36.9)
(0/39.1)
(10/0)
(1.2/23.15)
(2.2/38)
(76/0)
2
4
Figure 6: TMCM-3230 mechanical dimensions (all values in mm, (x/y))
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at
www.trinamic.com
