IDX 7505 Manual (V1.17 / 2011-APR-11)
43
Copyright © 2011, TRINAMIC Motion Control GmbH & Co. KG
7.4
Reset to factory default
Switch off the module and short-circuit pin 1 and pin 3 of the free contacts for a 6-pin connector on
the backside of the module. See Figure 7.5. Turn on the module and switch it off again to remove the
short-circuit. All settings are now at factory default.
1
3
Figure 7.5: Reset to factory default
7.5
Firmware update
For Firmware update start the program TMCM013boot.exe contained in the IDX-Folder of your
Figure 7.6: Firmware update tool
1.
Choose your RS485 connection.
2.
Select your module ID (default is A).
3.
Load the new firmware file (e.g. IDX_V1.08.hex), to download from
