background image

 

Page 12 

CONFORMITY AND COMPLIANCE 

 

FCC Compliance Statement 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the 

equipment is operated in a residential installation. This device generates, uses, and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in a particular installation. If this 

device does cause harmful interference to radio or television reception (this can be determined by turning, the device 

off and on), you are encouraged to try to correct the interference by one or more of the following measures: 

• 

Reorient or relocate the receiving antenna. 

• 

Increase the separation between the equipment and the receiver.  

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

• 

Consult the dealer or an experienced radio/TV technician for help. 

 

 

 

 

 

 

RADIO FREQUENCY INTERFERENCE STATEMENT 

Warning: 

 

 

 

CANADIAN DOC NOTICE 

For Class B Computing Devices 

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in 

the Radio Interference Regulation of the Canadian Department of Communications. 

 

CE MARKING DECLARATION OF CONFORMITY   

This LCD Monitor complies with the requirements of related European standards, which include: 

• 

Emission: EN 55022, EN 61000-3-2, EN-61000-3-3 

• 

Immunity: EN 50082-1   

• 

Safety: EN 60950 [Low-Voltage Directive (73/23/EEC) 

ENERGY STAR 

This product meets the Energy Star guidelines for energy 

efficiency. 

 

 

Caution  

To comply with the limits for an FCC Class B computing device, you should use the shielded 
signal cord and shielded power cord supplied with this unit. The Federal Communication 
Commission warns that changes or modifications of  the unit not expressly approved by the 
party responsible for compliance could void the user’s authority to operate the equipment.

 

This is a Class B product. In a domestic environment this product may cause radio interference 
in which case the user may be required to take adequate measures.

 

Summary of Contents for T3-HB15A1




















Reviews: