Trilliant SkyPilot Gateway Pro, Installation And Setup

Page: 18 / 62

10 | Chapter 2 Your SkyPilot Gateway Pro Kit
NOTE In theory, you should never need to service a unit once it is
deployed. However, should you need to do so, access to the serial
port may be required. Many installers find it prudent to run a
serial cable from the SkyPilot to a location that gives easier access.

Crossover cable (for connecting to a an access point, switch, or router)

RJ-45 unshielded connectors (connectors without a protective plastic
boot are preferred; they fit through the cable clamp more easily.)

RJ-45 crimping tool

Open-end wrench, adjustable or 1-3/6” (30 mm)

Surge protection device (strongly recommended)
 For configuration:

Computer with a serial port, a terminal emulation program, a network
interface card, and a Web browser. A laptop recommended for
convenience.