Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings Inc., its subsidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
25
Installation Guide for SecureMesh WAN® Gateway 2 - PL-0073A
8. Slide the round rubber seal down the cable so that it sits fully inside the
connector body and underneath the plastic fingers (see
).
Figure 11:
Rubber seal sits inside connector body
9. Thread the strain relief onto the connector body and tighten a few turns (see
).
Note:
Do not fully tighten the strain relief at this time.
Figure 12:
Strain relief on the connector
