
Charge the Battery
You must follow the battery charging instructions to avoid
damage to the electronic components.
1. Locate the AC Charger’s power plug and
plug it into a (120 or 220 volt) wall outlet.
2. Please locate the Charging Plug on
the left side of the BIKKE at the rear end
of the main tube. Insert the small round
connector from the charging unit into the
plug on the BIKKE frame (item 13 on page
7). When you see the red light illuminate
on the charger unit your BIKKE is now in
charging mode.
3. When the charger’s LED light turns from
red to Green, the unit is fully charged.
Please remove the charger.
Attention:
Normal charging takes
approximately 3-6 hours. Do not leave the
BIKKE on a charge for more than 8 hours.
Read additional information about the battery
and charging system on page 16.
12
Summary of Contents for Bikke
Page 1: ......
Page 7: ...COMPONENT DESCRIPTION 7 ...