Page 3
Minipak
This manual contains the information required to install
and program the TRIGON Minipak. If you are using
this manual to install this unit, it is very important to
read all the sections in order.
You should read these instructions before you begin
installation. This will insure that everything is done
efficiently.
Hookup Specifications
If you are using this manual as a programming guide
after the initial installation, you may find the TABLE
OF CONTENTS useful in locating the particular
programming procedure you need.
The Trigon Minipak is a multi-number Telephone Entry
System for resident/visitor control. Visitors contact the
desired tenant by entering a simple directory code. The
resident then grants or denies access.
The Minipak has a capacity of up to 400* telephone
numbers and up to 400* personal entry codes, and is
PBX compatible. It is constructed for rugged outdoor
use. Its long-lasting brushed-finish stainless steel
housing complements its thin design lines.
*Note: The maximum number of names that can be
displayed on the built-in directory is 52. Any larger
capacity will require an additional directory,
PRODUCT OVERVIEW
PRODUCT OVERVIEW
PRODUCT OVERVIEW
PRODUCT OVERVIEW
PRODUCT OVERVIEW
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
Serial Printer
(18 AWG; Shielded, 3 Conductor)
MUST HAVE PRINTER &CLOCK OPTION TO BE USED
Card Reader (OPTIONAL)
(Interface Module Req'd)
18 AWG; Shielded,
4 to 6 Conductor
Optional
Second
Relay
Camera Door
or Gate
Telephone Line - 22 AWG;
Shielded or Twisted,
2 Conductor
Postal
Lock
Box
Primary
Output
Relay
Main Entrance
Power Cabling -
Shielded or Twisted,
2 Conductor,
18AWG up to 250'
16AWG up to 500'
Alarm
Shunt
Relay
MINIPAK
TRIGON ELECTRONICS
ORANGE CA.
PUSH START
DIAL NUMBER
12.5"
9.5"
3.0"
Figure 1
Summary of Contents for Minipak
Page 16: ...Page 16 Minipak...
