l
Parallel
The system provides one parallel port that can be
selected as LPTl or LPT2 by SETUP. If enabled parallel
port makes conflict with off-board parallel port, on-board
parallel port is disabled and display the message for
conflict.
Leaving the Setup Program
When you have completed the changes, press the < ESC >
key. The SETUP program will display the message:
If you have made any mistakes, press N for No, then move the
cursor back up to the beginning and verify each parameter,
making any corrections necessary. When you are satisfied with
the option settings, press the <ESC> key, then press Y to
write the new settings into the configuration RAM. Your
computer will run through the self test diagnostics again and
try to read a diskette in the first floppy disk drive.
As mentioned above, you may see an error message if you don’t
have a system diskette inserted into the floppy disk drive.
The CMOS
Setup Program
2-9
Summary of Contents for CW3S20A Canadian Product
Page 1: ...SX386E OPERATIONS GUIDE...
Page 17: ...Appendix C Connector Pinouts I OPorts C l Expansion Slot Connectors C 5 Contents xvii...
Page 145: ...Figure 7 6 Mounting the Internal Hard Disk Drive 7 16 Expanding Your System...
Page 148: ...l Memory Bank Configurations l BIOS ROM 64K byte 150ns 2ea Specifications A 3...
