TRIGEM CW3S20A Canadian Product Operation Manual Download Page 48

Page: 48 / 166

EXTENDED PERIPHERAL SETUP

When you scroll down to this parameter, the following

message will be displayed on the right size of the Setup

message.

Peripheral Setup
IDE interface: Enabled

On-B/D FDC: Enabled

Mouse

: Enabled

Serial

: COMl

Parallel

: LPTl

IDE interface

The system has on-board IDE that can be enabled by

SETUP. This IDE provides two hard disk chip selects. If

any HDC though bus exists, user must disable on-board

IDE.

On-B/D FDC

System has on-board FIX which is enabled/disabled

automatically depending on the existance of option

board FDC. The FDC has on-chip analog data selector

that operates up to lMB/s, and is implemented by all

DP8473 Floppy Disk controller functions.

Mouse

The system has on-board PS/2 compatible mouse port

which is able to enable/disable by setup.

Serial

The system provides on-board one serial ports (COMl

and COM2) that is selectable by SETUP. If enabled

serial port conflict with off-board serial port, on-board

serial port is disabled and display the message for

conflict.

2-8

The CMOS Setup

Program

Summary of Contents for CW3S20A Canadian Product







































































































































































Search results

Summary of Contents for CW3S20A Canadian Product

Reviews:

Brands by name

Popular brands

TRIGEM CW3S20A Canadian Product, Operation Manual

Search results

Summary of Contents for CW3S20A Canadian Product

Reviews:

Brands by name

Popular brands