Changing Your SETUP
Before you can partition and format your hard disk, you have
to let your computer know that you have one. This is done
with the SETUP program. Once you have determined that
your hard disk is “clean,” that is to say neither partitioned nor
formatted, you should enter the SETUP program.
Turn your computer on.
When you see the following message,
press
< DEL > key. Move the cursor
to
the RUN SETUP
option and press Enter. The system displays the Setup Menu.
For
now,
look at the information
on
the left side of the screen.
6-4
Using
Your Hard Disk
Summary of Contents for CW3S20A Canadian Product
Page 1: ...SX386E OPERATIONS GUIDE...
Page 17: ...Appendix C Connector Pinouts I OPorts C l Expansion Slot Connectors C 5 Contents xvii...
Page 145: ...Figure 7 6 Mounting the Internal Hard Disk Drive 7 16 Expanding Your System...
Page 148: ...l Memory Bank Configurations l BIOS ROM 64K byte 150ns 2ea Specifications A 3...
