Technical Design-in Guide SLE G6 | 12-2018 | 2.1 | en
Mechanical Aspects
c
17 / 59
Version without housing for individual integration in the light
3.1.1. Notes on installation
Depending on the installation situation for the LED Driver and the modules, the following requirements must be met:
Protection measures against damage
Mechanical stress
LED modules contain electronic components that are sensitive to mechanical stress. Such stress should be kept to an absolute
minimum. In particular the following mechanical stresses should be avoided as these may cause irreversible damage:
½
CAUTION!
LED module and the associated housings are crimped together by sleeves.
Trying to separate LED module and housing will destroy the LED module!
All warranty and guarantee claims are void if LED module and housing are separated or if the LED module is altered, modified or
disassembled in any form.
Sufficient distance to active conducting materials
_
Sufficient strain relief when the LED Driver cover is closed
_
Sufficient cooling of the modules (the max. temperature at the tc point must not be exceeded)
_
Unrestricted exit of light from the modules
_
The module's push-in terminals allow easy wiring. They can be released via the trigger
_
Pressure
_
Drilling
_
Milling
_
Breaking
_
Sawing
_
and similar mechanical processing.
_
