Operation
DALI XC_IB 3.0 | 01.2014 | en
23
8.2
Changing colour temperature
i
Note
The
Config
rotary selector switch is used to assign different groups to the DALI XC inputs. Section
Project design
describes which group is assigned to the inputs.
Go to Section "Project design"...
Requirement:
– DALI XC must be in
TuWh
operating mode.
i
Note
The colour temperature of Tunable White luminaires in the group can only be changed using the double
momentary-action switch at input T3 and T4.
A low colour temperature is perceived as warm white light. In contrast a high colour temperature is
perceived as cool white light.
Reducing the colour temperature
Hold down double momentary-action switch .
The colour temperature of the Tunable White luminaires in the assigned group is continually decreased.
– or –
Briefly press double momentary-action switch .
The colour temperature of the Tunable White luminaires in the assigned group is decreased by one increment.
Increasing the colour temperature
Hold down double momentary-action switch .
The colour temperature of the Tunable White luminaires in the assigned group is continually increased.
– or –
Briefly press double momentary-action switch .
The colour temperature of the Tunable White luminaires in the assigned group is increased by one increment.
8.3
Recalling scenes
i
Note
The
Config
rotary selector switch is used to assign different scenes to inputs T1–T4. Section
Project
design
describes which scene is assigned to the inputs.
Go to Section "Project design"...
Requirement:
– DALI XC must be in
SC-A
or
SC
operating mode.
Briefly press single momentary-action switch.
The scene assigned to the momentary-action switch is recalled.
9
9
Summary of Contents for LuxControl DALI XC
Page 1: ...luxCONTROL DALI XC ...
