Tridonic 89800598, Manual

Page: 5 / 14

www.tridonic.com
5
Subject to change without notice. Information provided without guarantee.
Data sheet 12/20-EM083-11
Emergency lighting units
EM powerLED
I-SELECT 2 PLUG PRE / EXC
A
CCES
-
SORIES
3,5
xxxx xxxx
5,5
4,5
7,5
13
,5
9
Ordering data
Type
Article
number
Colour Marking Current
Resistor
value Packaging
bag Weight
per pc.
I-SELECT 2 PLUG 125MA BL 28001101
Blue 0125 mA 125 mA 40.00 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 150MA BL 28001102 Blue 0150 mA 150 mA 33.33 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 200MA BL 28001104 Blue 0200 mA 200 mA 25.00 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 225MA BL 28001105 Blue 0225 mA 225 mA 22.22 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 250MA BL 28001106 Blue 0250 mA 250 mA 20.00 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 275MA BL 28001107 Blue 0275 mA 275 mA 18.18 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 300MA BL 28001108 Blue 0300 mA 300 mA 16.67 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 325MA BL 28001109 Blue 0325 mA 325 mA 15.38 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 350MA BL 28001110
Blue 0350 mA 350 mA 14.29 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 375MA BL 28001111 Blue 0375 mA 375 mA 13.33 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 400MA BL 28001112 Blue 0400 mA 400 mA 12.50 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG MAX BL 28001099 Blue MAX MAX 0.00 kΩ 10 pc(s). 0.001 kg
Product description
• Ready-for-use resistor to set output current value
• Compatible with LED Driver featuring I-select 2 interface;
not compatible with I-select (generation 1)
• Resistor is base insulated
• Resistor power 0.25 W
• Current tolerance ± 2 % to nominal current value
• Compatible with LED Driver series PRE and EXC
Example of calculation
• R [kΩ] = 5 V / I_out [mA] x 1000
• Resistor value tolerance ≤ 1 %; resistor power ≥ 0.1 W;
base insulation necessary
• When using a resistor value beyond the specified range, the
output current will automatically be set to the minimum value
(resistor value too big), respectively to the maximum value
(resistor value too small)