WARRANTY
TECHNICAL DATA SHEET 100
LIMITATIONS
Trident warrants its products to substantially conform to its published specifications at the time of purchase. The foregoing is the
sole limited warranty applicable to the products. Trident HEREBY DISCLAIMS ALL OTHER WARRANTIES OF ANY KIND OR NATURE,
WHETHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANT-
ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY OTHER WARRANTY OTHER THAN THE WARRANTY SET FORTH ABOVE.
The user is solely responsible for determining suitability of the products for their particular use. While the actual application of
this product is out of the control of Trident, it is recommended that the application guidelines be followed completely and
accurately. Trident’s liability for any damage shall not exceed the purchase price of the product used, and it shall have no liability
for consequential, incidental or punitive damages.
3925 Stern Avenue | St. Charles, IL 60174
866-951-4293 | www.tridentprotects.com
TECHNICAL DATA SHEET
CYCLONE
Cyclone | Page 4 | TDS 113 | Revised Date: 5.1.2020
Protect sealer from freezing and store in a cool place when not in use. In winter, keep in heated area. This sealer is not
recommended for marble, granite, ceramic tile, and polished, honed or high gloss surfaces as they do not absorb the sealer. A test
area is ALWAYS recommended to determine product suitability and compatibility with your specific surface before use and to
verify if desired results are achievable. Due to the inherent variability of natural stone and clay products, long term performance
may vary. Please consult with Trident prior to sealing if there are concerns. The use of an anti-slip additive is recommended for
increased traction on surface inclines or around consistently wet areas such as pool deck surrounds. Do not use below grade or
where water is always present. Never try to seal wet or damp surfaces. A minimum air temperature of 40° (5°C) must be
maintained for a period of 24 hours prior to application. Air temperature should not exceed 95°F (35°C) during application. Work
should cease in inclement weather (rain or strong wind).
