22
Catchbox 2.4
Attaching the Antennas to the Receiver
Connect the two antennas to the receiver unit by
screwing them clockwise into the antenna ports
located at the back. After the antennas have been
connected, position them in a V shape to maximise
their effectiveness.
Receiver Setup
Connect the power supply to the receiver and plug
the cord into an AC power source. Connect the
audio output located at the back of the receiver unit
to a loudspeaker or sound mixer using the provided
6.3 mm / ¼ in audio cable. Use the provided adapter
pieces to match this cable to the input of your audio
device.
90°
5 Operations
Check that the AC input voltage stated on the included power supply
matches the AC mains voltage available at your location. Using the
power supply with a wrong AC voltage may cause damage to the
product.
! CAUTION !
The use of other antennas than those provided by the manufacturer
is strictly prohibited.
! WARNING !
