32
FOR THE INSTALLER
Safety instructions
•
The adjacent kitchen furniture must not be higher
than the cooker.
•
Walls adjacent to the cooker must be made of a
heat resistant material, or be coated with a heat
resistant material.
Positioning the cooker
Your cooker is provided with 4 height adjustable feet
to achieve a perfect stability.
Fitting the stability bracket
(not supplied)
480 mm.
100 mm.
295 mm.
A
If a stability bracket should be fitted by the installer,
these instructions should be read in conjunction with
the leaflet packed with the stability bracket.
Place the cooker in its intended position and level
cooker.
Mark off 295 mm (11
1/2
’’) from the right hand side of
the cooker as shown, this is the centre line of the
bracket fixing.
Draw a line 100 mm (4’’) from the front edge of the
levellingfeet (seethedrawing) andremove thecooker
from its position.
Mark off 480mm (19’’) back from this lineon thecentre
line of the bracket to locate the front edge of the lower
bracket.
Fix lower bracket (with two fixing holes) to the floor,
then measure height from floor level to engagement
edge on back of the cooker, dimension ’A’ on the
drawing.
Assemble upper bracket to lower bracket so that
underside of bracket is dimension ’A’+3 mm (1/8’’)
above floor level. Re--position cooker and check that
top bracket engages intothe cooker back toa depthof
75 mm (3’’), as shown on the drawing.
All manuals and user guides at all-guides.com
