9
HOW TO ASSEMBLE
Insert the Pressure Plug (located at the
bottom of the Auger Housing) by inserting
it into the Pulp Outlet properly, as shown in
the picture.
Attach the Auger Housing or Auger Housing
for Mincer to the Main Body. Rotate the
housing clockwise towards the Safety
Switch Link.
Place the Juicing Screen into the Pulp Wiping
Assembly, then assemble the Pulp Wiping
Assembly with the Auger Housing. Assemble
the Auger Housing with the Pulp Wiping Assembly
by aligning the marks on each of the units as shown
in the picture.
Place the Duoblade
™
Auger into the center of
the Juicing Screen or Auger Housing for Mincer.
Assemble the Feeding Chute Assembly/
Mincer Lid. Match the marks on Feeding
Chute Assembly/Mincer Lid to the marks on
Auger Housing/Auger Housing for Mincer, then
rotate the Feeding Chute Assembly towards the
mark on the Handle of Auger Housing as shown
on the picture.
CAUTION:
Assemble the Feeding Chute Assembly
last. If the Feeding Chute Assembly is assembled
before the Auger Housing is assembled on the Main
Body, the Auger Housing and the Main Body cannot
be assembled.
Place both the juice and pulp containers as
shown in the picture. The both cups look identical.
Plug the Power Cord into the power outlet.
Safety Link
Marks
1
1
2
2
2a
2a
3
3
4
4
4a
4a
5
5
7
7
6
6
