![background image](http://html1.mh-extra.com/html/triax/tss-400-sat/tss-400-sat_quick-starting-manual_1160857003.webp)
Safete instruction
Safety instructions
Read the safety instructions carefully before using the converter operating. Follow all warnings and information
on the device and in the manual.
Basic Safety Information
Electrical Connection
In case of malfunction, disconnect the converter from the power source.
To avoid fire hazard and risk of electrical shock, do not expose the converter to rain or moisture
Never open the housing. There is a danger of electric shock.
Connect the converter only to a professionally
installed mains socket of 100-240 V, 50-60 Hz
.
Pull out the power plug during a thunderstorm on the converter from the wall outlet. During a thunderstorm,
also remove the cable of the LNB from the converter
.
Should any solid object or liquid fall into the converter, unplug the power cord from the outlet. Have the unit
checked by qualified personnel before bringing it back into operation. There is a danger of electric shock.
Please note that the current source (socket) should be easily accessible
.
Do not bend or crimp the power cord.
If the power cord is damaged, you have to repair the converter of personnel before they use it again.
Otherwise there is a risk of electric shock.
Never leave children unattended to use the converter, or play with the antenna system .Refer servicing to
qualified personnel.
Obtain replacement parts only from the manufacturer. Changes to the unit will void the warranty.
Correct location
Install the converter verticaly on a firm, level surface, all connectors looking to the top
.
Intall the converter in an indoor area, protected from water, humity, dirt, heat source
Avoid the vicinity of:
-
Heat sources such as radiators,
-
Naked flames, such as candles,
-
Devices with strong magnetic fields, such as speakers
.
-
Do not place any objects filled with liquids (such as vases) on the receiver
.
Avoid direct sunlight and places with an extremely high amount of dust. Never cover the ventilation holes.
Ensure adequate ventilation of the converter
.
Do not place heavy objects on the converter.
If you take the converter from a cold to a warm environment, low humidity is reflected in the interior of the
converter. Wait in this case about an hour before turning it into operation. Keep the power cord and antenna
cable so that no one can step on or trip over them
.
Correct use: the converter is designed for the reception of free to air digital satellite programs in the private
sector. It is intended solely for this purpose and should only be for used. This includes attention to all
information of this manual, especially the safety.
Any other use is considered improper and may result in property damage or even personal injury. It also means
the immediate loss of warranty.
The manufacturer assumes no liability for any damage caused by improper use
.
Content
Check the delivery after purchase
.
Pos.
Pcs
Description
1
1
Converter
2
1
Power supply
3
1
Quick starting guide
-
1
User Manual (not shown)
General
With this SAT>IP converter, you can receive unencrypted (free-to-air) digital satellite (DVB-S and DVB-S2)
channels
.
Different satellite FTA live channels (DVB-S and DVB-S2) can be sent out to up to 4 connected users
simultaneously. Every four connected user can chose what to watch, on the device of their choice anywhere in
the house.
A connected user can be:
-
An IP Set Top Box (STB) connected on your in-home IP network (RJ-45 cable) and connected to your TV
via an HDMI cable
-
A Tablet or Smartphone connected wirelessly to your home WLAN router. Therefore, you need a wireless
home network with enough bandwidth (100 Megabit/seconds) and an app preinstalled on your wireless
device. You should find on the apps store of your wireless device the SAT>IP app making that your
Tablet or Smartphone can get and display live TV.
SAT>IP will deliver you linear TV to multiple screen at home. With SAT>IP solution, you will avoid problems of
buffering and poor pictures quality as it is a satellite reception with a high bandwidth.
Network Setting:
Network Interface:
The default network interface of the SAT>IP converter is utilizing Ethernet network. Users do not need to adjust
the setting if the SAT>IP converter is installed in the Ethernet environment.
IP Settings:
Automatic or Static mode can be chosen by users in the function. The default IP setting is automatic mode. The
SAT>IP converter does not include DHCP function, so it needs to be connected to a router or switch with DHCP
function. Once the SAT>IP converter is correctly connected to a device with DHCP function, users do not need
to adjust the setting.
By default, all IP settings of your SAT>IP converter are in automatic mode making the installation very easy with
your router.
Summary of Contents for TSS 400 SAT
Page 7: ...Your notes...